Notifications
Clear all
Printing 2.5 Upgrade Parts - What settings?
I want to print the parts individually for the 2.5 upgrade so if something goes sideways, I won't be wasting a lot of time and filament for a whole bed of parts. So, what print settings should be used?
Infill %
Perimeters
Infill type
Top/Bottom layers
Thanks!
Publié : 13/07/2018 12:19 am
Re: Printing 2.5 Upgrade Parts - What settings?
I believe it's
4 bottom,
5 top
2 perimeter
20% infill
Grid pattern
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
Publié : 13/07/2018 2:05 am
Topic starter
answered:
Re: Printing 2.5 Upgrade Parts - What settings?
Thanks Joan.
So normal Prusa presets in Slic3r. I usually do 3 perimeters on most of my prints, so I'll do that and go with the rest as standard.
Publié : 13/07/2018 3:29 pm