Notifications
Clear all
ASA weird layers
Hello, I was trying to print a handle with ASA but some layers came out weird. The most problematic areas are with an 48,5° overhang, which isn't a problem with other ASA I printed before. In addition to that, there were like bubbles in the grip area of the handle.
I dried the filament beforehand for around 5h at 65°C. Bed adhesion is great and it didn't warp.
250°C Nozzle / 100°C Bed / 0,98 extrusion factor / using ASA+ from super-filament / 170mm/s
Do you have any tips where I can optimise my print? Would really appreciate it.
Posted : 11/07/2025 6:25 am