Notifications
Clear all

Unofficial Prusa XL Waiting Thread  

Strona 9 / 39
  RSS
jsw
 jsw
(@jsw)
Famed Member
RE: Unofficial Prusa XL Waiting Thread
Posted by: @milehigh3der

I seriously wonder if part of the reason for the enclosure is for stacking to make room for the XL in print ‘gardens’.

Please correct me if I'm wrong, but I'm under the impression that the XL will be an open-frame printer, not an enclosed (from the factory) one-piece unit.

Opublikowany : 30/06/2022 8:38 pm
Win J.
(@win-j)
Member
RE: Unofficial Prusa XL Waiting Thread

From what was said on Yesterday's Prusa Live on YouTube, there seems to be an issue that Delta is unable to provide the Power Supplies in the quantity that Prusa needs.  So this may lead to some sort of re-design.  This late in the process I can only conclude that a major delay is in the offering.  The message is that there are constraints in the supply chain.

Posted by: @darkteck-3d

Cant wait , hoping to see an official ship time update soon . Honestly not expecting it until end of the year . 

 

Opublikowany : 30/06/2022 8:51 pm
Mirar
(@mirar)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Oh no. I hope they can resolve it. What kind of power supply does it need, anyway? 480W?

Posted by: @win-j

From what was said on Yesterday's Prusa Live on YouTube, there seems to be an issue that Delta is unable to provide the Power Supplies in the quantity that Prusa needs.  So this may lead to some sort of re-design.  This late in the process I can only conclude that a major delay is in the offering.  The message is that there are constraints in the supply chain.

Posted by: @darkteck-3d

Cant wait , hoping to see an official ship time update soon . Honestly not expecting it until end of the year . 

 

 

Opublikowany : 01/07/2022 8:27 am
bolsoncerrado
(@bolsoncerrado)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

I think they use like 3 or 4 Mk3 Delta PSUs for just one XL...

Opublikowany : 01/07/2022 8:36 am
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

The frame is open, but the frame is a partial cube and not a full enclosure.  

Posted by: @jsw
Posted by: @milehigh3der

I seriously wonder if part of the reason for the enclosure is for stacking to make room for the XL in print ‘gardens’.

Please correct me if I'm wrong, but I'm under the impression that the XL will be an open-frame printer, not an enclosed (from the factory) one-piece unit.

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 01/07/2022 10:50 am
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

I would rather wait and have them get it right.  

Posted by: @win-j

From what was said on Yesterday's Prusa Live on YouTube, there seems to be an issue that Delta is unable to provide the Power Supplies in the quantity that Prusa needs.  So this may lead to some sort of re-design.  This late in the process I can only conclude that a major delay is in the offering.  The message is that there are constraints in the supply chain.

Posted by: @darkteck-3d

Cant wait , hoping to see an official ship time update soon . Honestly not expecting it until end of the year . 

 

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 01/07/2022 10:51 am
Erik polubić
Win J.
(@win-j)
Member
RE: Unofficial Prusa XL Waiting Thread

Not 100% sure but I’m guessing they start with 2 and once you get more toolheads they go up to 3.

Opublikowany : 01/07/2022 11:12 am
MileHigh3Der
(@milehigh3der)
Honorable Member
RE: Unofficial Prusa XL Waiting Thread

Stack your Mini’s and Mk3s to make room for your XL.  I’m hoping that the the XL will come with some kind of ‘dry box’ set up.

Posted by: @jsw
Posted by: @milehigh3der

I seriously wonder if part of the reason for the enclosure is for stacking to make room for the XL in print ‘gardens’.

Please correct me if I'm wrong, but I'm under the impression that the XL will be an open-frame printer, not an enclosed (from the factory) one-piece unit.

 

Opublikowany : 01/07/2022 1:40 pm
Selta
(@selta)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Do you have a link or timestamp where that was said? I don't want to watch an hour long thing to find that. Why aren't they communicating that more directly and clearly to folks who put deposits?

Posted by: @win-j

From what was said on Yesterday's Prusa Live on YouTube, there seems to be an issue that Delta is unable to provide the Power Supplies in the quantity that Prusa needs.  So this may lead to some sort of re-design.  This late in the process I can only conclude that a major delay is in the offering.  The message is that there are constraints in the supply chain.

Posted by: @darkteck-3d

Cant wait , hoping to see an official ship time update soon . Honestly not expecting it until end of the year . 

 

 

Opublikowany : 01/07/2022 5:40 pm
Diem
 Diem
(@diem)
Illustrious Member

It's in the Q&A at the end.

Cheerio,

Opublikowany : 02/07/2022 9:31 am
MileHigh3Der
(@milehigh3der)
Honorable Member
RE: Unofficial Prusa XL Waiting Thread

I wish that they had taken the chance in the video to talk about how how the power supply issue will delay things, or that they had a work around.  I didn’t hear either, so I’m thinking that this is going to be a big disruption.

It’s Q3, and we should have better guidance than “we don’t have power supplies”….

 

Opublikowany : 03/07/2022 6:17 am
Artur5
(@artur5)
Reputable Member
RE:

Delta is not the only supplier of PSUs out there. If their incapacity to supply enough units would delay the release of the XL for weeks or months, Prusa could and should search alternatives. What about Meanwell , for instance ?.

 

This post was modified 2 years temu by Artur5
Opublikowany : 03/07/2022 8:18 am
Mirar
(@mirar)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

I would guess it's a certification and testing issue. Prusa does all the needed EU testing and certification to make sure it doesn't burn down your house or disrupt your wifi. Restarting that with an alternative PSU is probably the delay here, and it's usually a matter of finding a testing facility with a free time slot for that particular test...

Posted by: @artur5

Delta is not the only supplier of PSUs out there. If their incapacity to supply enough units would delay the release of the XL for weeks or months, Prusa could and should search alternatives. What about Meanwell , for instance ?.

 

 

Opublikowany : 03/07/2022 9:46 am
burtronix polubić
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE:

I would guess Prusa has their own in-house testing but it will take time.  

Posted by: @mirar

I would guess it's a certification and testing issue. Prusa does all the needed EU testing and certification to make sure it doesn't burn down your house or disrupt your wifi. Restarting that with an alternative PSU is probably the delay here, and it's usually a matter of finding a testing facility with a free time slot for that particular test...

Posted by: @artur5

Delta is not the only supplier of PSUs out there. If their incapacity to supply enough units would delay the release of the XL for weeks or months, Prusa could and should search alternatives. What about Meanwell , for instance ?.

 

 

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 03/07/2022 1:01 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

I think providing us with information would be a poor decision until a solution is found.  Supply chain issues are enough.  I would bet there are having trouble sourcing a few items and by keeping it vague, they can get better prices.  Meanwell will probably be the power supply source is delta can't do it.  

Posted by: @milehigh3der

I wish that they had taken the chance in the video to talk about how how the power supply issue will delay things, or that they had a work around.  I didn’t hear either, so I’m thinking that this is going to be a big disruption.

It’s Q3, and we should have better guidance than “we don’t have power supplies”….

 

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 03/07/2022 1:07 pm
burtronix
(@burtronix)
Reputable Member
RE:

EU certification requires testing by an independent lab. Internal testing is for design verification & manufacturing QA.

Posted by: @cwbullet

I would guess Prusa has their own in-house testing but it will take time.  

Posted by: @mirar

I would guess it's a certification and testing issue. 

 

 

 

 

Whatever you find to do with your hands, do with all your might!

Opublikowany : 03/07/2022 1:44 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

It is hard to believe Meanwell does not have an off-the-shelf power supply that would match their specs.  Either way, that should not take much time to be tested.  UL testing doe snot take too long.  

Posted by: @burtronix

EU certification requires testing by an independent lab. Internal testing is for design verification & manufacturing QA.

Posted by: @cwbullet

I would guess Prusa has their own in-house testing but it will take time.  

Posted by: @mirar

I would guess it's a certification and testing issue. 

 

 

 

 

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 03/07/2022 1:51 pm
burtronix
(@burtronix)
Reputable Member
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @cwbullet

It is hard to believe Meanwell does not have an off-the-shelf power supply that would match their specs.  Either way, that should not take much time to be tested.  UL testing doe snot take too long.  

Posted by: @burtronix

EU certification requires testing by an independent lab. Internal testing is for design verification & manufacturing QA.

Posted by: @cwbullet

I would guess Prusa has their own in-house testing but it will take time.  

Posted by: @mirar

I would guess it's a certification and testing issue. 

 

 

 

 

 

They might have the product, but not enough inventory or capacity. Testing might not take long, but getting on the schedule might.

Whatever you find to do with your hands, do with all your might!

Opublikowany : 03/07/2022 5:56 pm
Mirar
(@mirar)
Estimable Member
RE:

Specs doesn't really matter, you need to have the entire product tested. By an independent lab. Sometimes several, depending what they can do - EMC alone can require several different labs depending on the certifications. I've never been involved in certification for a product that has a heating element, so I don't know how that is certified.

 

Possibly you can sneak in smaller component changes but it's not certain.

This post was modified 2 years temu by Mirar
Opublikowany : 03/07/2022 6:21 pm
Diem
 Diem
(@diem)
Illustrious Member

hard to believe Meanwell does not have an off-the-shelf power supply that would match their specs.

But can they supply the 50,000 or so that Prusa need?

Cheerio,

Opublikowany : 03/07/2022 10:03 pm
burtronix polubić
Strona 9 / 39
Share: