Notifiche
Cancella tutti

Unofficial Prusa XL Waiting Thread  

Pagina 11 / 39
  RSS
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

A vocal minority feel they should be given an update on a product that isn’t even late yet.  If you are that upset. Request your deposits be returned.  That will send a message.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 05/07/2022 10:29 pm
burtronix hanno apprezzato
MileHigh3Der
(@milehigh3der)
Honorable Member
RE: Unofficial Prusa XL Waiting Thread

How many emails have they sent out in the almost 9 months since we gave them our money?

I want Prusa to be successful, we aren’t asking for anything unusual or out of the ordinary. 

Postato : 06/07/2022 12:13 am
Selta hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

I have received 2.  I signed up for blog updates and have received 2 updates.  

Posted by: @milehigh3der

How many emails have they sent out in the almost 9 months since we gave them our money?

I want Prusa to be successful, we aren’t asking for anything unusual or out of the ordinary. 

 

--------------------
Chuck H
3D Printer Review Blog

Postato : 06/07/2022 1:21 am
DonCo
(@donco)
Active Member
RE:

 

Posted by: @drkmstr

Calm down folks, the electronics industry is insanely back-stabby right now. I can't even get reliable delivery dates from one of the largest component manufacturers in my field. We've had to buy out entire stock quantities of parts simply because the supplier stated they won't do another production run for years based upon current orders and backlogs.

It's been amazingly difficult to keep things moving at work with the component supply issues. I don't deal with that stuff, but I do see the outcome on production. Worse than unavailable components are the counterfeit ones, or parts that are just slightly out of spec. Those can mess up a run of boards and require a lot of rework. 

I'm sure Prusa will figure it out sooner or later. They could be better about communicating the issues they are encountering to us. 

Postato : 06/07/2022 1:51 pm
Razor hanno apprezzato
Mirar
(@mirar)
Estimable Member
RE:

I noticed that we're seeing a lot more components that are on the edge of the spec, yes. Like you order something that's +-1% it's almost always a guarantee you're getting +1% or -1% now... actually had problems with a serial connection because one component was -0.5% and the other was +0.5% bps and they got a shaky connection. :/ All within spec, just never got those edgecases before.

Questo post è stato modificato 2 years fa 2 tempo da Mirar
Postato : 06/07/2022 2:10 pm
Razor hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @mirar

I noticed that we're seeing a lot more components that are on the edge of the spec, yes. Like you order something that's +-1% it's almost always a guarantee you're getting +1% or -1% now... actually had problems with a serial connection because one component was -0.5% and the other was +0.5% bps and they got a shaky connection. :/ All within spec, just never got those edgecases before.

Any specifics?  I am not sure I have seen or heard of this. Do you have photos or a link?

--------------------
Chuck H
3D Printer Review Blog

Postato : 06/07/2022 3:56 pm
Sam_PNW
(@sam_pnw)
Active Member
RE: Unofficial Prusa XL Waiting Thread

A fun and friendly thread. We'll see how crow tastes in October, I expect...

Postato : 12/07/2022 6:44 am
Razor
(@razor)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @mirar

I noticed that we're seeing a lot more components that are on the edge of the spec, yes. Like you order something that's +-1% it's almost always a guarantee you're getting +1% or -1% now... actually had problems with a serial connection because one component was -0.5% and the other was +0.5% bps and they got a shaky connection. :/ All within spec, just never got those edgecases before.

Between that and some extremely “loose interpretations” of what defines those tolerances from a certain country that shall remain nameless. I worked for years sourcing steel, the pretzel logic used when trying to sneak something through that’s not up to spec is unreal.

Mini+MK3S+XL 5 Tool

Postato : 14/08/2022 2:56 pm
ludodg
(@ludodg)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Many words were spoken… 🙂

can someone remind what timeframe , deliverydate, … was predicted by prusa?

it is long now, that i haven’t heared from the XL. What is the status? Did I miss some news?

Postato : 18/08/2022 11:21 pm
gkas
 gkas
(@gkas)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Read the blog

Postato : 19/08/2022 3:00 am
ludodg
(@ludodg)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @gkas

Read the blog

Indeed, there was a new post, update that I missed. Thank you for pointing that out to me in such a kind way, sir  🙂

Postato : 19/08/2022 10:31 am
StuartB e Razor hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

Let us all hope they start shipping this month.  I am gonna wait for the 5 heads.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 09/03/2023 10:36 pm
ZEMSO
(@zemso)
Trusted Member
RE: Unofficial Prusa XL Waiting Thread

if you want the 5 head your at the end of the list 😀
coming back since months now to see if something is moving...but nope....still nothing.

i will be so happy once i get it....

 

 

TO SELL THIS CRAP HEAVILY OVERPRICED TO A FAN BOY *mhahahaha

 

really. they made their biggest mistake ever. But to be honest iam happy for the massive delay. now i own 2 bambus and couldnt be happier.

thank you Prusa :-*

 

 

Postato : 10/03/2023 10:31 am
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @zemso

if you want the 5 head your at the end of the list 😀
coming back since months now to see if something is moving...but nope....still nothing.

i will be so happy once i get it....

 

 

TO SELL THIS CRAP HEAVILY OVERPRICED TO A FAN BOY *mhahahaha

 

really. they made their biggest mistake ever. But to be honest iam happy for the massive delay. now i own 2 bambus and couldnt be happier.

thank you Prusa :-*

 

 

I think we will hear something new soon.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/03/2023 12:58 pm
Niklas
(@niklas-2)
Eminent Member
RE: Unofficial Prusa XL Waiting Thread

You Said this now in 2 Threads … do you know smth or Just Blabla ? …. 
It’s Funny That Ppl still have Trust in „prusa will Talk to us unworthy customers“ After this Long Time of Bad decisions 🙁 

Posted by: @cwbullet

 

Posted by: @zemso

if you want the 5 head your at the end of the list 😀
coming back since months now to see if something is moving...but nope....still nothing.

i will be so happy once i get it....

 

 

TO SELL THIS CRAP HEAVILY OVERPRICED TO A FAN BOY *mhahahaha

 

really. they made their biggest mistake ever. But to be honest iam happy for the massive delay. now i own 2 bambus and couldnt be happier.

thank you Prusa :-*

 

 

I think we will hear something new soon.  

 

Postato : 10/03/2023 7:24 pm
StuartB
(@stuartb)
Active Member
RE: Unofficial Prusa XL Waiting Thread

Hi Ludodg, I think the XL was first due in June/July 2022. Then because of the chip delay, they quoted November - December 2022. Then said January/February 2023, then March for single and April beta testing the multi-head, which we were told could be 2 months.

To me this means the first singles should ship during this month but as far as I can see here, no order conversion emails have been sent and no further news of this either; so it is now unlikely that the first single XL will ship this month.

I don't know if the multi-head will still start testing in April or if it is tied to the singles starting to ship. Let's say it is not dependent on shipping singles; 2 months of testing would mean June 2023 for the first in line to get the order conversion emails.

No timescales have been given for how long it takes from full payment being made to shipping date, and no prices or times for shipping have been released. No final specifications, no user/build manuals have been shown, no software has been previewed. No enclosure has been shown.

All of us are waiting and buying a product on trust, we kind of know what it should do, we know reasonably well what it looks like, we know how much it costs but not how much it will cost to get it delivered. We have not seen (bar one possible print) any of the Beta testers prints nor have we seen any independent reviews online.

I'll said it again, we are buying on reputation and trust alone. Some Prusa users may accept this but converts to Prusa, I'm not to sure, I for one wanted to get away from 'stack 'em high, sell 'em cheap' printers but the contempt shown by Prusa has, I think broken any trust I had.

Posted by: @ludodg

Many words were spoken… 🙂

can someone remind what timeframe , deliverydate, … was predicted by prusa?

it is long now, that i haven’t heared from the XL. What is the status? Did I miss some news?

 

Postato : 11/03/2023 12:47 pm
E For Extrude hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @stuartb

Hi Ludodg, I think the XL was first due in June/July 2022. Then because of the chip delay, they quoted November - December 2022. Then said January/February 2023, then March for single and April beta testing the multi-head, which we were told could be 2 months.

To me this means the first singles should ship during this month but as far as I can see here, no order conversion emails have been sent and no further news of this either; so it is now unlikely that the first single XL will ship this month.

I don't know if the multi-head will still start testing in April or if it is tied to the singles starting to ship. Let's say it is not dependent on shipping singles; 2 months of testing would mean June 2023 for the first in line to get the order conversion emails.

No timescales have been given for how long it takes from full payment being made to shipping date, and no prices or times for shipping have been released. No final specifications, no user/build manuals have been shown, no software has been previewed. No enclosure has been shown.

All of us are waiting and buying a product on trust, we kind of know what it should do, we know reasonably well what it looks like, we know how much it costs but not how much it will cost to get it delivered. We have not seen (bar one possible print) any of the Beta testers prints nor have we seen any independent reviews online.

I'll said it again, we are buying on reputation and trust alone. Some Prusa users may accept this but converts to Prusa, I'm not to sure, I for one wanted to get away from 'stack 'em high, sell 'em cheap' printers but the contempt shown by Prusa has, I think broken any trust I had.

Posted by: @ludodg

Many words were spoken… 🙂

can someone remind what timeframe , deliverydate, … was predicted by prusa?

it is long now, that i haven’t heared from the XL. What is the status? Did I miss some news?

 

I took the announcement differently.  The first single heads should ship in March - we have 19 days.  The multi heads would ship 2 months later.  That is not April.  I am not sure where that came from.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 11/03/2023 1:13 pm
ZEMSO
(@zemso)
Trusted Member
RE: Unofficial Prusa XL Waiting Thread

middle march and as you said. not a single review online. for a honest review any youtuber with quality content needs to use the machine for some weeks.
whoever thinks to get your "payment Email" this month needs some tissues again.

the biggest point is still that this machine is just a thingiverse toy for PLA and PETG.

Even if someone else made a housing for this huge Monster, it hast o be that big to cover the PTFE Tubes that your printroom is so big i wouldnt bet on it to raise 50°c chambertemps with just heatbed-heating.

a 350 voron already needs 45min to heat the chamber with bedfans.

Since it tooks a decade for prusa to offer a MK3 housing (dont talk about prices) dont expect any solution in the next years.
And IF it will cost anothe 1000.

that "Curtain" is 100% useless.

You can have always Problems with anything. And yes it can be hard sometimes with supply chain.
But theres no reason no excuse to treat your customers this way. bad communication, no answers. 

10 Years of Experience in 3D Printers and still struggle more than any other 3D Manufacturer.

Sometimes you just get what you deserve.....

i bet they lost 50% customers in the last 12months (800$ price Range buyers)

Postato : 11/03/2023 1:22 pm
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @zemso

that "Curtain" is 100% useless.

Have you used one?  I suspect not so your statements are undermined by your conjecture.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 11/03/2023 1:29 pm
Chrono
(@chrono)
Active Member
RE:

Well, we only know from Minute 5:05, that multi tool will ship 2 months after beta tests. While josef stated, that beta testers will have them soon(tm) at the time we have no idea if this actually happened. (or do we?).

Edit: took away the video link, the embedded thing is just too big and does not use the timestamp

Posted by: @cwbullet

 [...]

I took the announcement differently.  The first single heads should ship in March - we have 19 days.  The multi heads would ship 2 months later.  That is not April.  I am not sure where that came from.  

 

Postato : 11/03/2023 1:32 pm
Pagina 11 / 39
Condividi: