Mini's Delayed extrusion after travel issue on XL!?
I had a weird issue when printing two round things on the XL, one of the pieces has 3mm missing where the seam is, the other has a bad looking seem but isn't missing a gap.
I looked around and found this issue that the Mini has that look a lot like this.
https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/2997
After confirming the issue was affecting my mini I adapted the test provided by Prusa on that GitHub issue to try it on the XL and it look exactly like the issue on the mini.
Can some of you give this test a try and confirm it's not just me.
gcode is available here, as well as more pictures of the actual test result.
https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/2997#issuecomment-1743999693
The bottom of one of the parts also has that reverse elephant foot going.. Not sure what this is about.
RE: Mini's Delayed extrusion after travel issue on XL!?
Seem pretty clear that the issue on the mini is bowden related and so it can't be the same issue on the XL even if it's really similar.
Would love to have confirmation from other people that it's not just me before I open another issue.
It seem to also affect the MK4 from that one other person with the same issue in the linked github issue.