Notifiche
Cancella tutti
Thicker layer on same hight in print
On my last couple of prints I get a thicker layer on all my prints. The layer is at the same hight in the print (about 15mm). It looks like a layer shift, but its on all sides. I think this started after updating Prusa Slicer. Someone got an idee?
Postato : 30/04/2021 7:20 am
RE: Thicker layer on same hight in print
For me this looks like the seem position, but I cannot really see if and how the layers are positioned or how the objects got printed.
Postato : 30/04/2021 8:13 am
Topic starter
answered:
RE: Thicker layer on same hight in print
@herbert
thanks for ansering. The lines in the picture are layers. But I think I have solved it, I took a closere look, and at the point where the line happens, my filament sensor got stuck on the frame, and at about 15mm high it snaps lose. So I fixed that and id a test print, it looks like this was the problem.
Postato : 30/04/2021 8:56 am
geekandi hanno apprezzato