Prusament Artifacts/Blobs
I assembled my mini last week and initally it printed wonderfully. I did have an issue with 2 failed prints where the extruder chewed through the filament. I cleaned that up and checked the hotend, all seemed clear. I adjusted the tension screw as per customer service and was back to printing.I've only printed with Prusament PLA and PETG so ive used the associated stock settings with prusaslicer.
Now my last 2 prints have had issues with blobs/artifacts appearing randomly on the skin of what im printing. I've attached my curent print which i restarted with a fresh roll. Initally I was useing PETG, so i thought maybe since its been out for a week it could be affected by moisture? I open up a new roll of prusa PLA, reslice the same file and although it looks a little better, there still are small blobs in the skin.
Any suggestions? the printer seemed to print very well for the first prints both from the flash drive and from what i sliced.
Orange Juice Please