Notifications
Clear all
Missing Lines - Please Help!
Hello. I have had a Mini+ for about a year and have printed quite a bit with no issues. Recently my prints have started missing lines (see picture) and I can not for the life of me figure out why. I have done cold pulls and cleaned out the nozzle. I have replaced the ptfe tube and re-calibrated PINDA and Z axis, but nothing works. I am not good enough with the settings to do much there yet.
Any advice would be super welcome. Thank you!
Napsal : 15/05/2023 2:59 pm
RE: Missing Lines - Please Help!
Is it always on the same locations? have you checked so you don't have a lot of filament residue on your extruder cog?
Printer: Original Prusa Mini+
Nozzles: E3D 0.25, E3D Nozzle X 0.4 , E3D 0.4, Bondtech 0.6 CHL
Printables: Tysonsw
Mastodon: [email protected]
.
Napsal : 17/05/2023 1:53 pm