Notifiche
Cancella tutti
Firstlayer Issue with rPETG
Hi there
I was wondering if someone could help me. My first layer of rPETG is way of. In some parts of the buildplate it prints pretty clean and on other parts it is way off.
Software:
- PrusaSlicer 2.7.1,
- InputShaper
- 0.2
- Rest: default settings
- Temperatur checked with a temptower
Filament:
- rPetG (3D-Jake)
- Temp: 230°
- Filament has been dried and is quite new
Steps I have done:
- Firstlayer has been adjusted (Live-Z). I've tried differnt states. The ersult in some places is always underwelming.
- Angles (x-axis) has been checked
- Temptowers has been printed
- Nozzel has been cleaned
I changed the filament to PLA (yellow) and the result was clean (yes, Live-Z is a bit far away). I got a second mini and he prints rPTG better.
Does someone has similar problems or a way to fix it?
Thanks for helping out 🙂
Postato : 05/02/2024 10:18 am