Notifications
Clear all
First layers infill printing issue
Hello All,
I have seen this happening on another Prusa printer before, but now it's happening in mine. Part of the first few layers start to pile up some PLA and cause the print to fail, here's a photo:
Can you all help me resolve this? Thank you!
Best,
Renan
Opublikowany : 16/12/2022 4:58 pm
RE: First layers infill printing issue
Looks like there is some kind of contamination on the bedplate in that spot. Cleaning the plate might stop the problem. If not maybe a new plate would solve the problem.
Tom
Opublikowany : 16/12/2022 7:58 pm
RE: First layers infill printing issue
Could also be a leaking hot end.
If at first you don't succeed, skydiving is not for you.
Find out why this is pinned in the general section!
Opublikowany : 20/12/2022 4:27 pm