Ultimaker Cura profile for Prusa MINI+ and 0.25 nozzle
 
Notifications
Clear all

Ultimaker Cura profile for Prusa MINI+ and 0.25 nozzle  

  RSS
diku22
(@diku22)
Active Member
Ultimaker Cura profile for Prusa MINI+ and 0.25 nozzle

Hello,

I successfully imported the profiles for my Prusa Mini+ as described in how-to-import-profiles-to-cura-4-x-windows

into Ultimaker Cura 4.9.1 and made several nice prints with the default 0.4mm nozzle 😀 

Now I changed the nozzle to 0.25mm, and I don't know which steps are necessary to setup Cura for the different nozzle size.

What I tried so far is: adding a new Prusa Mini printer (named Mini 0.25) and changed the nozzle size in the  machine settings to 0.25mm.

What else do I have configure?

 

Best Answer by diku22:

Since I didn't get any answers here, I just gave it a try and only increased the line width with factor 1.1 (=0.275).

See this helpful website by Bob https://projects.ttlexceeded.com/3dprinting_nozzle_sizes.html#guidelines-for-printing-with-different-nozzle-sizes

I used 0.1 mm layer height and had quite good results.

Posted : 31/05/2021 6:33 pm
diku22
(@diku22)
Active Member
Topic starter answered:
RE: Ultimaker Cura profile for Prusa MINI+ and 0.25 nozzle

Since I didn't get any answers here, I just gave it a try and only increased the line width with factor 1.1 (=0.275).

See this helpful website by Bob https://projects.ttlexceeded.com/3dprinting_nozzle_sizes.html#guidelines-for-printing-with-different-nozzle-sizes

I used 0.1 mm layer height and had quite good results.

Posted : 04/06/2021 6:19 pm
Share: