[Rozwiązany] The nozzle on my mini, at the end of the print, has been parked in the top left corner of the bed, crashing with object printed  

The nozzle on my mini, at the end of the print, has been parked in the top left corner of the bed, crashing with object printed

Hello,

why at the end of every print the nozzle is parking in the top left corner of the bed?

Of course it crash and destroy the print if some parts are there (see picture).

I'm using default settings in PrusaSlicers 2.5.1 Mac OS.

This is the default End g-code:

G1 E-1 F2100 ; retract
{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}
G1 X178 Y178 F4200 ; park print head
{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}
G4 ; wait
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
M221 S100 ; reset flow
M900 K0 ; reset LA
M84 ; disable motors