Notifiche
Cancella tutti
Stringing or not stringing ? Dry filament
Hello Community,
I've got trouble to have correct settings for my filament. I printed a temperature tower successfully, but struggle to print a square tower without strings.
The item that comes out with stringing issue is a 4 towers square.
I've followed the guide of Prusa and teachingtechyt.
Strangely, if I generate the GCODE directly from teachingtechyt it comes out well (see pictures).
I decreased my temperature down to 210°C according to the temperature tower and can go as low as 202 without issue.
I increased retractation distance in PrusaSlicer, etc.
What is the difference between the PrusaSlicer and the settings that works well from teachingtechyt ?
The filament isn't wet.
Thanks in advance !
Postato : 17/09/2023 9:28 pm