Sequential printing - print head knocks out print.
Hello,
I found out a potential issue with MINI+ sequential printing. I printed this GCODE and it always knocked out one of the pieces. I used default arrange option in Prusa Slicer.
How can I set it up to guarantee that no collisions would happen?
In this case, it did not do anything to the printer, because the piece was tiny, but for collisions with larger prints, it may be a bigger issue.
Attaching picture and gcode.
Standoff-AdapterToCWG_0.2mm_PETG_MINI_25m.gcode
Best Answer by jcjames_13009:
Hi
I faced same issue one time. I increased the "Extruder clearance radius" in PrusaSlicer. Default value is 35mm I just set it to 36mm instead
What I don't understand is why with default value I don't always face this issue...
JC
Increase extruder clearance radius
Hi
I faced same issue one time. I increased the "Extruder clearance radius" in PrusaSlicer. Default value is 35mm I just set it to 36mm instead
What I don't understand is why with default value I don't always face this issue...
JC
Prusa MINI+ at home / Prusa MK3S+ in the Fab Lab / You can have a look at my designs here printables.com