Prusa Mini no PID Tuning after flashing FW 5.1.2
HI folks.
I flashed my Prusa Mini to newest FW a few weeks ago and was very happy with the new features.
I also upgradet my printer a few month ago with an E3D Revo hotend, calibrated it with PID tuning and used the new values in my gcode.
But now I lost all my data after reinstall my PC so I don't have the values anymore.
I searched in the printer menu and also tryed with pronterface (M303 -> unknown command) but I can't use PID tuning anymore with FW 5.1.2.
My heater now jumps between 170°C and 240°C ...
What can I do?
RE: Prusa Mini no PID Tuning after flashing FW 5.1.2
Well if you printed from USB you can open one of the gcode files on it to recover your old PID settings
As for PID tuning now, yes the newest firmware has removed that option. Honestly I don't know if PID tuning is necessary now with whatever Prusa does to tune the MINI's hotend. I have the revo hotend as well and my prints have been coming out excellent (for me) with FW5.1.2.
MINI+ with FW:4.3.3, Bondtech IFS Extruder, drilled out PC4-M8 couplers, 1 piece Capricorn bowden.