Notifications
Clear all
Print bed
How do one get the printer to slide the printbed to the front when printing is finish?
Best Answer by karl-herbert:
How do one get the printer to slide the printbed to the front when printing is finish?
To be done in the printer settings:
Opublikowany : 24/10/2020 6:24 pm
RE: Print bed
It's in the end gcode in the slicer printer profile. Looks something like this:
G1 X0 Y200 F3000 ; home X axis
This post was modified 5 years temu by --
Opublikowany : 24/10/2020 7:10 pm
2 ludzie polubili
RE: Print bed
How do one get the printer to slide the printbed to the front when printing is finish?
To be done in the printer settings:
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
Opublikowany : 24/10/2020 8:59 pm
1 ludzie polubili
Topic starter
answered:
RE: Print bed
Thank you that did it 😀
Opublikowany : 25/10/2020 12:00 pm