RE: Mini PSU connector...
@rossrosh,
sorry for the late answer!
I would not go above 26V for max voltage. I think that you can't trim the 24V power supply unit much higher.
An electronics specialist can certainly give you more accurate information: BUDDY_v1.0.0
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: Mini PSU connector...
Ah, sorry! My bad - actually the connector fits into the Prusa Mini when I tried to push it in - even though the dimensions are slightly off.
I also ordered the KPJX-PM-4S-ND. I tried pushing the original Prusa Mini PSU connector into that. Super tight. First I didn't think it would work at all, but after applying some considerable force it went in fine. Some small metal scraping on the inside of the KPJX afterwards. So that fits as well, but I think the dimensions are not a 100% match.
Anyway, thanks for the tip on the connectors!!
RE: Mini PSU connector...
👍
happy printing!
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: Mini PSU connector...
Does anyone know where I can get a right angle version of this connector if they even exist? I want to push my Prusa Mini all the way back against the wall and having a right angle on the power cable would help.
RE: Mini PSU connector...
Mean Well GST220A24-R7B - or simple buy one 221W