Material stops coming out while printing
Hey
In each print the material stops coming out in the middle of printing in large models
After this happens I find the material manually and return and the printer goes back to normal work
Thanks for the helpers
https://forum.prusa3d.com/wp-content/uploads/2020/11/WhatsApp-Video-2020-11-18-at-18.55.26.mp4
RE: Material stops coming out while printing
Video of the problem
RE: Material stops coming out while printing
@danielll1400
This can have many causes:
- clogged hotend
- Filament in PTFE difficult to move
- extruder does not transport the filament evenly
- wrong printing parameters...
https://help.prusa3d.com/en/article/clogged-nozzle-hotend-mk3s-mk2-5s_2008
https://help.prusa3d.com/en/article/cold-pull-mini_126399
https://help.prusa3d.com/en/guide/how-to-access-and-clean-the-extruder-pulley-mini_126457
https://help.prusa3d.com/en/guide/how-to-replace-a-hotend-ptfe-tube-mini_119449
https://help.prusa3d.com/en/guide/how-to-replace-a-hotend-ptfe-tube-mini_119449#148093
In the forum and on the Prusa help pages you will find several more instructions, as this is a very common topic.
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.