LCD Info diplayed - ADD Layer Number printing out of the total number of layers
Would it be possible to add some more info in the LCD of the print status?
I really like to use Octoprint but I have to say that I now prefer to use only Prusa LCD to tune a bit velocity temp etc while printing from there.. What I still miss is just where the print is, to compare for instance with the PrusaSlicer sliced model.. the percentage is fine but would also be nice to see the layer number that is printing out of the total number of layers so if something is weird I can go to the layer and see if it is a problem of settings or of the 3D model I can improve for better prints.
Is this a feature I can ask here?
Does it make sense also for someone else?
Thanks a lot,
Martino.
RE: LCD Info diplayed - ADD Layer Number printing out of the total number of layers
Mini firmware requests should be made here https://github.com/prusa3d/Prusa-Firmware-Buddy/issues on the mini firmware github .
RE: LCD Info diplayed - ADD Layer Number printing out of the total number of layers
Thanks will do it there.
Happy printing to everyone.