Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.
 
Notifications
Clear all

[Solved] Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.  

Stránka 9 / 9
  RSS
Hello
(@hello)
Noble Member
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

yeah esun is amzing even though it says pla+ just print it at normal pla temp 

Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models

Napsal : 03/01/2023 3:43 am
Hello
(@hello)
Noble Member
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

officialy hit 9 pages lol

Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models

Napsal : 03/01/2023 3:43 am
harmlessVI
(@harmlessvi)
Trusted Member
Topic starter answered:
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

good to know.

very nice lol

Napsal : 03/01/2023 3:47 am
Hello
(@hello)
Noble Member
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Happy printing

Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models

Napsal : 03/01/2023 4:03 am
harmlessVI
(@harmlessvi)
Trusted Member
Topic starter answered:
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Thanks and same to you! 🙂

Started an actual print and seem to have gotten it stable at about 255c which is insane but hey, it is looking nice so far.

Napsal : 03/01/2023 4:16 am
Hello
(@hello)
Noble Member
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Nice 1 thing I thought of if you have a thermometer check nozzle temp make sure thermistor isn't playing up 

Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models

Napsal : 03/01/2023 5:03 am
harmlessVI se líbí
Hello
(@hello)
Noble Member
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

I doubt it is playing up but if you have thermometer always better to check

Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models

Napsal : 03/01/2023 5:04 am
Hello
(@hello)
Noble Member
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

how did the actul print go

Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models

Napsal : 04/01/2023 4:27 am
harmlessVI
(@harmlessvi)
Trusted Member
Topic starter answered:
RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Quite good. I have reliably printed a few parts now of varying size with the Hatchbox PLA and they have all turned out pretty well. Been running it at about 250-255c.

Napsal : 04/01/2023 7:15 am
Stránka 9 / 9
Share: