[Solved] Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.  

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

yeah esun is amzing even though it says pla+ just print it at normal pla temp 

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

officialy hit 9 pages lol

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

good to know.

very nice lol

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Happy printing

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Thanks and same to you! 🙂

Started an actual print and seem to have gotten it stable at about 255c which is insane but hey, it is looking nice so far.

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Nice 1 thing I thought of if you have a thermometer check nozzle temp make sure thermistor isn't playing up 

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

I doubt it is playing up but if you have thermometer always better to check

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

how did the actul print go

RE: Having trouble with print quality (under-extrusion) after printing with relatively no problem for a year or so.

Quite good. I have reliably printed a few parts now of varying size with the Hatchbox PLA and they have all turned out pretty well. Been running it at about 250-255c.