First Layer issues
Hi Everyone.
I'm new to 3d printing and just got my Prusa Mini. I did the calibration and found it looks straight on the first layer calibration around .600 all the way to .690
But when i test print the logo, it doesnt stick and now it got all stuck around the nozzle.
What am i doing wrong?
RE: First Layer issues
Hi Everyone.
I'm new to 3d printing and just got my Prusa Mini. I did the calibration and found it looks straight on the first layer calibration around .600 all the way to .690
But when i test print the logo, it doesnt stick and now it got all stuck around the nozzle.
What am i doing wrong?
Maybe this sites could help:
Original Prusa MINI - Calibration and First Print
https://www.prusa3d.com/first-layer-issues/
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: First Layer issues
@karl-herbert
I may have figured it out. Its just that the calibration starts at 0.000 and ive been playing with it for 5 hours now trying to find it. I think i found the level at .850 because the first prusa logo print is sticking now.
RE: First Layer issues
Hi Michael,
I am guessing that you mean -0.850 because Live Z should never be positive!
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: First Layer issues
@joantabb
Correct -0.85