Notifications
Clear all

[Solved] Firmware update failure.  

  RSS
skorper
(@skorper)
Member
Firmware update failure.

I am trying to update my 3.3.3 to 5.1.2 so I can use Prusa Slicer. I was told to update to 4.4.0 first because of the bootloader. Whet I did this, the bootloader updated from 1.1.9 to 2.0.2

BUT  I get this after every restart. I don't know what to do.

Posted : 23/01/2024 8:57 pm
Share: