Notifiche
Cancella tutti
Firmware and USB
I have downloaded the Firmware update to the provided USB but when I put the USB into my Prusa Mini it is not updating the Firmware. What am I doing wrong or does anyone know what my issue might be?
Postato : 07/10/2025 11:02 pm
RE: Firmware and USB
try push the button and firmware is 6.2.6
Postato : 08/10/2025 11:48 am
Topic starter
answered:
RE: Firmware and USB
I have inserted the flash drive with the firmware on it and then I push the restart button and it doesn't change it. I am stuck on the 4.3.4 firmware
Postato : 08/10/2025 11:50 am
RE: Firmware and USB
https://help.prusa3d.com/article/firmware-updating-mini-mini_124784
If you have older firmware (or not), after reboot quickly double press the rotating knob.
See my GitHub and printables.com for some 3d stuff that you may like.
Postato : 08/10/2025 10:28 pm