Notifications
Clear all

Final park position problem  

  RSS
Knabbler
(@knabbler)
Active Member
Final park position problem

The printer ends each print job with the nozzle running into the beds surface.

The route seems first to be okay, but instead of stopping in that reasonable park position, it moves further on in -x and -z direction.

Firmware version of the printer is: 4.3.1. Software version of Prusa-Slicer ist 2.4.2.

Video attached.

Posted : 23/08/2022 11:52 pm
mark
 mark
(@mark)
Reputable Member
RE: Final park position problem

Upgrade to the latest firmware, or at least 4.3.4.

Regards,

Mark

Posted : 24/08/2022 3:34 am
languer liked
Share: