Avisos
Vaciar todo
bug - initialization has a hard knock with really slow Y axis settings
I adjusted my Mini's Y axis Jerk limit to 1 mm/s (btw, shouldn't that be mm/s^3?), and acceleration to 200 mm/s^2. forgetting the reasoning for this (the result is fabulous bed adhesion), during the last part of the initialization (after the 16 point mesh level detection) as the Y axis moves the bed all the way back, it seems to start deceleration way too late and there's hard knock when the bed hits the limit at near full speed. I get that this is far from the standard settings, but I'd love to see either the initialization to use it's own decel settings, or start the decel process earlier. Firmware is 4.0.5
Respondido : 17/05/2020 10:50 pm
Topic starter
answered:
RE: bug - initialization has a hard knock with really slow Y axis settings
confirmed in the newer firmware 4.2.1.
Respondido : 23/12/2020 3:12 pm