How not to print borderline when printing multiple objects?
 
Notifications
Clear all

How not to print borderline when printing multiple objects?  

  RSS
prusanewuser
(@prusanewuser)
Prominent Member
How not to print borderline when printing multiple objects?

Hello, I noticed that when there were multiple objects within a single .3mf file, a large borderline is created automatically in Prusa Slicer 2.6.1. How to disable that?

Opublikowany : 09/10/2023 7:41 pm
FoxRun3D
(@foxrun3d)
Famed Member
RE: How not to print borderline when printing multiple objects?

I don't know what you mean by "borderline"? Can you post a picture? Or ideally a 3mf file?

 

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Opublikowany : 09/10/2023 8:50 pm
Diem
 Diem
(@diem)
Illustrious Member

Do you mean the skirt?

The settings are in Print Settings > Skirt and brim

Cheerio,

Opublikowany : 09/10/2023 9:37 pm
prusanewuser polubić
prusanewuser
(@prusanewuser)
Prominent Member
Topic starter answered:
RE:

Yes, this is exactly what I referred to. Thank you.

In practice, is it worth to enable it? It is kind of waste of filament.

 

Posted by: @diem

Do you mean the skirt?

The settings are in Print Settings > Skirt and brim

Cheerio,

 

Opublikowany : 10/10/2023 2:32 pm
FoxRun3D
(@foxrun3d)
Famed Member
RE: How not to print borderline when printing multiple objects?

I disabled them in all my custom print profiles. They're a relic of the days when it was a last chance to adjust your nozzle height. With good live z calibration I don't really see why I'd need a skirt. 

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Opublikowany : 10/10/2023 5:09 pm
prusanewuser polubić
Share: