Notifiche
Cancella tutti
What is 1.75 PLA filament length of initial line on Prusa MINI+?
With default profile, 0.15 Quality layer setting, 0.4mm diameter nozzle.
Postato : 15/03/2022 7:35 pm
Topic starter
answered:
RE: What is 1.75 PLA filament length of initial line on Prusa MINI+?
This line:
Postato : 15/03/2022 7:59 pm
Topic starter
answered:
RE: What is 1.75 PLA filament length of initial line on Prusa MINI+?
Younger son said: measure the weight of that line.
I did, and the line weight was between 36mg and 39mg for several prints.
Is weight after print same as filament weight before print?
If so, I could cut 5cm fresh filament, measure its weight and determine length per miligram to determine answer of thread question?
Postato : 18/03/2022 8:12 pm
Topic starter
answered:
RE: What is 1.75 PLA filament length of initial line on Prusa MINI+?
OK, I did cut 50mm long filament and did weigh it on milligram precision scale as 150mg.
That is 3mg/1mm.
So initial line filament length is 12-13mm?
Postato : 19/03/2022 6:33 pm