Unofficial Prusa Mini Wait Thread  

RE: Unofficial Prusa Mini Wait Thread

@vid-ratajec

My shipping notification was created at 10 Am, however according to Dpd the printer was picked up a day after.

RE: Unofficial Prusa Mini Wait Thread

@kwachter88

Same for me. But it still hasn't arrived. Dpd is painfully slow, like they are hauling it with a donkey. It moved from Prague to Linz in 2days. And Dpd tracking has a very big delay

RE: Unofficial Prusa Mini Wait Thread

Shipping notices are generated when Prusa enter the request onto the carriers order system to generate a reference to put on the packaging, not when the printer has left the building.

RE: Unofficial Prusa Mini Wait Thread

@gordon-w

I know that, My printer left their Prague on the 27 and has since made  it Linz. It is just weird because I have very good experience with Dpd international shipping

RE: Unofficial Prusa Mini Wait Thread

Hello,
Prusa Mini: Blalck/BlackOrdered: 31/08/2020Shipped: 26/10/2020 => 56 DaysDelivered:29/10/2020 => 3 Days
Total => 59 Days (8 weeks)
Location: Paris, France
Shipped by: DPD

RE: Unofficial Prusa Mini Wait Thread

Prusa Mini, black/orange, no extras — ordered Oct 13. Imagine I still have quite a bit of waiting ahead of me yet. 

RE: Unofficial Prusa Mini Wait Thread

Mine just arrived! Ordered on Sep 04, shipped on Nov 03 and arrived at the Netherlands Nov 05 through DPD. 

Prusa mini, black/orange, magnetic sheet and sensor

RE: Unofficial Prusa Mini Wait Thread

Ordered mine this week.  Currently scheduled for January 4th.  Four days earlier to beat the brexit deadline and potential import duties would be nice.  Fingers crossed!

Shipping times

RE: Unofficial Prusa Mini Wait Thread

My order is holding steady for 23 NOV.  

RE: Unofficial Prusa Mini Wait Thread

Hi all ordered 09/12 marked as shipped just now 11/10 

Sensor and both sheets and a couple of rolls of filament.  

RE: Unofficial Prusa Mini Wait Thread

Ordered 9/17 just received a shipping confirmation! 😀 

RE: Unofficial Prusa Mini Wait Thread

Posted by: @pablopaul

Hi all ordered 09/12 marked as shipped just now 11/10 

Sensor and both sheets and a couple of rolls of filament.  

Arrived today and just finished the first Bency.  The quality was amazing really surprised how quick and easy it was after the frustration of playing around with an A8 about 3 years ago. 

I did have a couple of small issues though

1)Lining up the extruder axis bolts was a real Pain but nothing a few minutes of frustration didn't solve.

2) The screen retention screw seems to be to short spent 10 minutes trying to get the thread to engage with no luck so swapped for a longer one i had in my spares bin.

3) When i first tried to load filament the sensor said nothing was loaded when i looked the screw that holds the balance arm within the sensor was missing.  I took it off for now I just wanted to get going and i wasn't 100% sure on size i guess it's M3x12mm but will need to check. 

RE: Unofficial Prusa Mini Wait Thread

I just got shipping confirmation. I ordered on 09/17/2020 with a book, both sheets, filament sensor and two rolls. 

RE: Unofficial Prusa Mini Wait Thread

Ordered yesterday. It's a long wait 🙁

For some reason after my postcode, my delivery and billing address states "Out of Italy". I'm in the UK.

I don't think this was auto-populated thing from the browser as I looked at Chrome's stored addresses for me and it doesn't have that anywhere.

Anyone else's state that in their address?

RE: Unofficial Prusa Mini Wait Thread

@and-14

Not seen that before. It might be worth chatting to support via the web chat on the e-shop page and seeing what they say. I would hope that it wouldn't confuse the carrier, but better safe than sorry.

In my experience the Mini is worth the wait 😀 .

RE: Unofficial Prusa Mini Wait Thread

Posted by: @gordon-w

@and-14

In my experience the Mini is worth the wait 😀 .

That is 100% true!

RE: Unofficial Prusa Mini Wait Thread

Posted by: @pablopaul

Posted by: @pablopaul

Hi all ordered 09/12 marked as shipped just now 11/10 

Sensor and both sheets and a couple of rolls of filament.  

Arrived today and just finished the first Bency.  The quality was amazing really surprised how quick and easy it was after the frustration of playing around with an A8 about 3 years ago. 

I did have a couple of small issues though

1)Lining up the extruder axis bolts was a real Pain but nothing a few minutes of frustration didn't solve.

2) The screen retention screw seems to be to short spent 10 minutes trying to get the thread to engage with no luck so swapped for a longer one i had in my spares bin.

3) When i first tried to load filament the sensor said nothing was loaded when i looked the screw that holds the balance arm within the sensor was missing.  I took it off for now I just wanted to get going and i wasn't 100% sure on size i guess it's M3x12mm but will need to check. 

I recommend the prusa-support.. they ARE helpful and charming.

RE: Unofficial Prusa Mini Wait Thread

@johannes-1

I am not sure about charming but polite and helpful.  Support will save you a lot a headaches.  

RE: Unofficial Prusa Mini Wait Thread

Soooo ordered mine on Sunday the 15th. Im ready to wait for quite a while, even if its hard. Patience is not really one of my Strenghts.

My first 3D Printer so i'm really looking forward to dive into it. We've a Ender 3 Pro in my Work Lab for a few Weeks now so i had the chance to get a small insight. But after some Consideration i think im gonna be more happy with the Prusa Mini.

Regards from Germany !

RE: Unofficial Prusa Mini Wait Thread

anybody shipping?  What happened to the spreadsheet?