Notifiche
Cancella tutti
Temperature tower gcode
Does anyone have a temp tower gcode for pla that they could please share?
Postato : 22/12/2019 12:31 am
RE: Temperature tower gcode
Here's an example I've used for PLA as Before layer change G-code under Printer Settings->Custom G-Code. Adjust the heights for your tower:
;BEFORE_LAYER_CHANGE
; layer_z is height of current layer in mm
G92 E0.0
;[layer_z]
{if layer_z <= 2.0}M104 S235
{elsif layer_z <= 9}M104 S230
{elsif layer_z <= 16}M104 S225
{elsif layer_z <= 23}M104 S220
{elsif layer_z <= 30}M104 S215
{elsif layer_z <= 37}M104 S210
{elsif layer_z <= 44}M104 S205
{elsif layer_z <= 51}M104 S200
{elsif layer_z <= 58}M104 S195
{elsif layer_z <= 65}M104 S190
{elsif layer_z <= 72}M104 S185
{endif}
My notes and disclaimers on 3D printing
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
Postato : 22/12/2019 2:23 am
Topic starter
answered:
RE: Temperature tower gcode
thank you
Postato : 26/12/2019 2:55 am