Avisos
Vaciar todo
Successful printing with Ninjaflex on Prusa Mini
Just thought I'd let you all know that printing with Ninjaflex on a Prusa Mini is definitely possible. 🙂
In fact I'm printing with it right now. More details on my blog.
https://keen101.wordpress.com/2020/05/16/prusa-mini-first-prints-with-ninjaflex/
Respondido : 31/05/2020 3:35 pm
Topic starter
answered:
RE: Successful printing with Ninjaflex on Prusa Mini
Respondido : 31/05/2020 3:44 pm
WNC2 y me gusta
RE: Successful printing with Ninjaflex on Prusa Mini
Have tried NinjaFlex on the Mini with success using the Filatech FilaFlex40 profile.
If there is too many retractions/stops, the filament starts under-extruding. I think the filament starts softening in the extruder cooling part and stops feeding properly through the bowden.
The same model works great with a harder filament like FilaFlex40 or 92A.
Models with long extrusions and few start/stops gives the best result.
Have a look at my models on Printables.com 😉
Respondido : 01/06/2020 12:50 am