Notifications
Clear all

Ironing issue, please help!  

  RSS
Maxi
 Maxi
(@maxi-2)
Active Member
Ironing issue, please help!

Hello frens!
I have massive issues with the ironing of surfaces. The problem is, that at some point in the ironing process the extruder wheel grooves into the filament. After that no filament is extruded anymore and the surface is ruined.

I use a stock Prusa Mini+ PrusaSlicer and jetblack prusament.

I think the problem could be that the nozzle is too close to the surface and no filament can be extruded, so the resistance is too big. I tried to reduce the ironing flow from 15% to 2% and to increase from 15% to 30% but no success.

I spent a half spool of filament to solve this, but still the same result.

Can you help me please?

 

Posted : 21/08/2022 8:39 am
Maxi
 Maxi
(@maxi-2)
Active Member
Topic starter answered:
RE: Ironing issue, please help!

Here are some better images:

Posted : 21/08/2022 8:50 am
Maxi
 Maxi
(@maxi-2)
Active Member
Topic starter answered:
RE: Ironing issue, please help!

Posted : 21/08/2022 9:17 am
Share: