Notifications
Clear all

Revo Six nozzles with the MK4  

  RSS
RedDawg
(@reddawg)
Reputable Member
Revo Six nozzles with the MK4

Is it possible to use the Revo Six nozzle set (0.25, 0.4, 0.6, 0.8mm) with the MK4/MK4S? Are there any MK4 profiles available for these sizes?

Hear ye, Hear ye! Step right up folks and get your Government salvation here! Less than $.002 per word! Amazon.com/dp/B0B8XMMFP4

Posted : 25/08/2024 1:59 pm
Walter Layher
(@walter-layher)
Prominent Member
RE: Revo Six nozzles with the MK4

Not in a way that is interchangeable. The differences are to big. I have seen some adapted MK4 heater block somewhere. Better stick with the originals for each system. Click on the image to see it without cropping and the differences between the two nozzle systems should be very obvious.

Posted : 25/08/2024 4:24 pm
Walter Layher
(@walter-layher)
Prominent Member
RE: Revo Six nozzles with the MK4

I found the page again: https://github.com/thomasloven/nextrevo-mod

Posted : 25/08/2024 4:31 pm
Share: