MK4S Non-IS Profile Request
I saw some discussion on this for PETG but it should be available for any material. The MK4 has a non-IS profile available and it is useful when printing parts that might shake loose due to the faster bed movement with the IS profile. I would like to see a non-IS profile for the MK4S that still takes advantage of the new nozzle and fan. Maybe it's just a matter of lowering the bed acceleration value (I did not look into how the MK4 profile was different from the MK4 IS profile).
RE: MK4S Non-IS Profile Request
I saw some discussion on this for PETG but it should be available for any material. The MK4 has a non-IS profile available and it is useful when printing parts that might shake loose due to the faster bed movement with the IS profile. I would like to see a non-IS profile for the MK4S that still takes advantage of the new nozzle and fan. Maybe it's just a matter of lowering the bed acceleration value (I did not look into how the MK4 profile was different from the MK4 IS profile).
It sounds like having a non-IS profile for the MK4S would be really helpful, especially for printing materials beyond PETG. Maintaining the benefits of the new nozzle and fan while reducing bed acceleration could be key to preventing parts from shifting during prints. Tweaking the bed acceleration might indeed be the solution—worth a look to see if it's an easy adjustment in the profile settings.