MK4S Non-IS Profile Request
I saw some discussion on this for PETG but it should be available for any material. The MK4 has a non-IS profile available and it is useful when printing parts that might shake loose due to the faster bed movement with the IS profile. I would like to see a non-IS profile for the MK4S that still takes advantage of the new nozzle and fan. Maybe it's just a matter of lowering the bed acceleration value (I did not look into how the MK4 profile was different from the MK4 IS profile).
RE: MK4S Non-IS Profile Request
I saw some discussion on this for PETG but it should be available for any material. The MK4 has a non-IS profile available and it is useful when printing parts that might shake loose due to the faster bed movement with the IS profile. I would like to see a non-IS profile for the MK4S that still takes advantage of the new nozzle and fan. Maybe it's just a matter of lowering the bed acceleration value (I did not look into how the MK4 profile was different from the MK4 IS profile).
It sounds like having a non-IS profile for the MK4S would be really helpful, especially for printing materials beyond PETG. Maintaining the benefits of the new nozzle and fan while reducing bed acceleration could be key to preventing parts from shifting during prints. Tweaking the bed acceleration might indeed be the solution—worth a look to see if it's an easy adjustment in the profile settings.
RE: MK4S Non-IS Profile Request
Right behind this request as if you swap nozzle, hardened in my case, it still appears to use IS speeds which is no good all the time. Yeah could manually redo profiles but that's a backward step.
Also finding the hi flow nozzle strings a lot more than a standard.