Notifiche
Cancella tutti
Issues printing tall thin print in ASA
Issues printing tall thin part in ASA
Questa discussione è stata modificata 10 months fa 3 tempo da AK
Postato : 21/11/2024 3:08 am
It would probably help to change the orientation on the print-sheet. Tall thin parts tend to flex and accuracy is lost. If it *HAS* to be printed in that orientation try slowing the print down, 50% speed should give enough time for it to stabilise.
Cheerio,
Postato : 28/11/2024 1:37 pm