Notifiche
Cancella tutti
3D printing handbook Error
Ive got a mk4 printer and wanted to take out the nozzle so i opend the "3D printing handbook" online on how to change the nozzle. However i did not turn off the printer because it did not specify so i thought it didnt matter. So when i reinstalled the nozzle the thermistor was dead. I contacted support and they sent me a new one but i feel like the handbook should be updated so nobody else makes the same mistake.
Postato : 14/09/2024 5:59 pm
RE: 3D printing handbook Error
I really can't see how it being powered on would kill the thermistor. You'd get mintemp errors when you unplug it. If you've got a Multimeter would be interested to see what the dead one is reading as.
Postato : 17/09/2024 12:54 pm
Topic starter
answered:
RE: 3D printing handbook Error
I did try use a multimeter and it showed 3.3 M ohm and the min temp was 0C on the home screen and -30C in the sensor menu
Postato : 17/09/2024 8:08 pm