Notifications
Clear all
PG Front Case Confusion During Upgrade
I'm in the process of upgrading to a Mk4S. In this step the manual is asking me to use a 13x24x2.5 spacer. When I look in the Nextruder bag there is only a 5x10x0.1 spacer. Are they the same and is the upgrade manual incorrect?
https://help.prusa3d.com/guide/1c-parts-preparation_495623#496630
Napsal : 25/10/2024 11:31 pm
RE: PG Front Case Confusion During Upgrade
Are you sure that you are looking at the right directions? When I did my MK4 to MK4S upgrade I recall noting that the instructions said that I didn't need the spacer for the MK4S planetary gear cover. The instructions that you link are for upgrading to a MK4, not MK4S.
See my (limited) designs on:
Printables - https://www.printables.com/@Sembazuru
Thingiverse - https://www.thingiverse.com/Sembazuru/designs
Napsal : 27/10/2024 6:05 am