Benachrichtigungen
Alles löschen
Clearance issue with new left-side print head cover!
My 4 to 4S upgrade went reasonably well, but there seems to be a clearance problem with the new left printhead cover. It was contacting on the left side before the head body and causing X calibration failures. I had to file a pair of notches into the front edge of the cover to gain the necessary clearance. If I had to guess I'd say the new stamped metal fan mount was improperly formed. Would appreciate feedback from Prusa on this.
Veröffentlicht : 06/10/2024 2:40 pm
husleves gefällt das