Notifiche
Cancella tutti

TPU outer shell not adhering to fill  

  RSS
joe406
(@joe406)
Eminent Member
TPU outer shell not adhering to fill

I am printing with VarioShore TPU and have had several print failures where the outer skin of the print doesn't adhere to the fill.  I have set the nozzle temp to 200 and bed temp to 50.  TIA,

Joe

Postato : 16/01/2024 3:32 am
joe406
(@joe406)
Eminent Member
Topic starter answered:
RE: TPU outer shell not adhering to fill

Postato : 16/01/2024 2:40 pm
Condividi: