Benachrichtigungen
Alles löschen
Strange rectilinear infill fail with 0.8n PETG and input shaper
Hi. I was printing a simple cube with a 0.8 mm nozzle. On the second pass of the rectilinear infill, it failed in a very strange way. See picture. What's causing this issue? Simply too high of a print speed? I tried printing the exact same print but with gyroid instead and it worked fine. Setting were standard 0.8n input shaper with manufacturer recommended settings (add:north PETG).
Veröffentlicht : 04/02/2024 9:40 pm