Clear all

Poor results with Ninjaflex on new Mk4  

Poor results with Ninjaflex on new Mk4


Recently upgraded from the MK3S+ to MK4. I have developed and printed Ninja flex (85A) very successfully on the MK3S+.  I used the exact same filament settings and print settings from my MK3S+ for the MK4 and got very poor print results. The image shows the exact same part with same settings printed on the different printers. Any suggestions to improve the print quality on the new Mk4. Printer profile used was: Original Prusa MK4 0.4 nozzle




Posted : 20/11/2023 3:43 pm