Notifications
Clear all
Flexfill 98 mods?
I currently print with a MK3 plus and have been able to print Flexfill 98 by printing a fan housing and installing a fan to cool the extruder and keep the feeding filament from softening too much. I also have reduced the tension to the minimum and have about an 80% print success rate with most problems coming in the first couple layers from "blobbing" and lack of adherence. I am considering purchasing a MK4 and would like to know what if any mods are necessary to print 98 and how the prints turn out compared to the MK3. TIA,
Joe
Napsal : 18/05/2023 6:48 pm