Notifiche
Cancella tutti
3rd Print on new MK4 Kit in Taulman Alloy 910 Black - benchy
Had some old alloy 910 kicking around - dried in food dehydrator for about 12 hours. Smooth PEI plate roughed up with 800 grit wetdry and diluted elmers white glue. Other than the smokestack. I am impressed with my 3rd print.
What should I do to troubleshoot the smokestack? Printed at 255/60, no fan. I think it's a speed issue for the stack?
Postato : 14/02/2024 6:09 pm
RE:
What kind of filament is this? I mean material. PLA, PETG...? The collapse of the chimney is caused by too high a temperature of filament and turned off cooling, when the lower layer does not solidify enough.
Questo post è stato modificato 10 months fa da miroslav.h4
Postato : 14/02/2024 8:47 pm
PC hanno apprezzato
Topic starter
answered:
RE: 3rd Print on new MK4 Kit in Taulman Alloy 910 Black - benchy
According to it's MSDS it is a Polyamide copolymer, Nylon 6/69.
Postato : 14/02/2024 9:37 pm