Notifications
Clear all

Pause printing problem  

  RSS
Russ
 Russ
(@russ-2)
Member
Pause printing problem

I wish to pause to insert nuts into my model, but have found that the filament oozes out while waiting to resume printing.  When I resume printing, filament is missing from the first layer after the pause.  I fixed this by using a "Change filament" command instead of pause.  This completely refills the nozzle with filament before restarting the print.  Can the pause command be updated to ensure the nozzle has plenty of filament before recommencing printing?

Posted : 03/01/2024 11:59 pm
Share: