Nextruder LEDs
I've just upgraded my MK3S+ to MK4. It's working beautifully. But can someone please advise me on the purpose of the row of red LEDs behind the two idler screws on the Nextruder. What are they trying to tell me?
RE: Nextruder LEDs
Could u take a photo
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Nextruder LEDs
At the time of taking this picture it looks like one was illuminated. I think there are two more.
Oh that one I was really confused I thought u ment on the hotend. That shows that the love board has power and lights will turn on when the nozzle is heating and when it's loading
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Nextruder LEDs
Ok. Thank you.
RE: Nextruder LEDs
They're labeled on the back of the board. so from the front Left to right you have:
power indicator, hot end fan on, part cooling fan on, and extruder heater on.
When someone asks you if you're a god, you say, "YES!"
RE: Nextruder LEDs
Thank you so much. Never thought of looking on the back.
RE: Nextruder LEDs
You’re very welcome. I tried to be more helpful then when I was curious about the same thing a while back.
When someone asks you if you're a god, you say, "YES!"