Notifiche
Cancella tutti
Marlin Request Timeout #13530
Using Prusa Connect.
MK4 Input Shaper Latest Firmware.
Received this crash on MK4. Had to reset.
I suspect it had to do with:
Changing speed too many times.
Changing before actually printing.
All is fine if I am carefull with changing speed.
BTW printer is fantastic.
9 + hours on MK3
3.5 on MK4.Faster if your increase speed. Slowly moving up. Now at 130%.
Postato : 08/12/2023 2:50 pm