Incorrect nozzle temperature set by printer
 
Notifications
Clear all

Incorrect nozzle temperature set by printer  

  RSS
Lukáš Duběda
(@lukas-dubeda)
Active Member
Incorrect nozzle temperature set by printer

Hello everyone,

since a few months ago, I don't know why, but the MK4 starts the print with incorrect bed and nozzle temperatures. Even though my preset in the PrusaSlicer and in the GCode explicitly specifies, for example, 215°C for the nozzle, the printer always starts with 170°C.

I've tried everything that I can think of.

 

Has anyone seen this issue? NO MATTER WHAT I SET IN MY PROJECT, the printer just keeps this "default" value?

Posted : 07/10/2024 2:16 pm
Neophyl
(@neophyl)
Illustrious Member
RE: Incorrect nozzle temperature set by printer

That is normal. That’s the preheat temperature. That it’s uses to probe the bed, so filament doesn’t leak as much during the process. Just let it continue and it will get to the set temperature. 

Posted : 07/10/2024 7:46 pm
Lukáš Duběda
(@lukas-dubeda)
Active Member
Topic starter answered:
RE: Incorrect nozzle temperature set by printer

Really? I never noticed this behavior. But, ok, I'll give it a try and get back here with my findings.

Thank you!

Posted : 07/10/2024 8:17 pm
Share: