Notifiche
Cancella tutti
How can I change the nozzle in 1/100mm (e.g. 0.39) steps?
Hey,
I got a obxidian steel nozzle and had bed adhesion problems after mounting it. I read elsewhere that the nozzle is not really 0.4 mm but a little bit smaller. I printed with slizer settings of 0.39 and the print just looks perfekt!
How do I set the nozzle in the MK4 to 0.39? It only allows for 0.35 or 0.4.
Postato : 09/11/2024 5:58 am