Notifications
Clear all
MK4 model
I'm designing my own enclosure in Fusion 360 and for this purpose I'm looking for a CAD model (STEP or at least STL) of the MK4 printer. I've searched for it, but found only MK3 model.
Publié : 08/03/2024 9:36 pm
RE: MK4 model
For these reasons, MK3 and MK4 printers can be considered identical for enclosure design and production. If they differ, then only by a few millimeters, which should not have any effect. Also note that Prusa does not differentiate between the types of printers placed in its enclosure.
Publié : 09/03/2024 6:12 am
UjinDesign a aimé
RE: MK4 model
If you haven't already, you should read the assembly manual for the Prusa enclosure. 36 steps. You need to modify the printer some to prevent the power supply from overheating, etc.
Publié : 16/03/2024 7:32 pm